Redarc Battery Isolator to suit LiFePO4 Battery

The SBI12-LLD is a microprocessor-controlled Load Disconnect Isolator. The SBI12-LLD is designed for use in lithium battery applications (LiFePO₄)as a system to protect the battery from being excessively discharged by auxiliary loads, enabling the auxiliary battery to remain above the level at which internal protection circuitry would activate. Falling below this threshold would prevent many chargers from recharging the battery.

Put simply, once the auxiliary battery has been overly discharged, the Load Disconnect Isolator will turn off any connected loads. Similarly, if the battery climbs back above a suitable level, the Load Disconnect Isolator will restore power to the connected loads.

Spike protection

The SBI12-LLD Smart Start battery isolator incorporates a number of spike protection components specifically designed to reduce the risk of damaging the unit. It is also designed to prevent any spikes generated by the solenoid coil from affecting vehicle equipment.

Features

• Overmould design
• Compact in size and easy to install
• Silver contacts for longer life and suitable for marine applications
• Power saving technology
• Fault indication
• Fully surge protected

System Voltage	12V Nominal
Turn ON Voltage	11.0V
Turn OFF Voltage	10.5V
Turn ON Delay	10 sec
Turn OFF Delay	2 sec
Max. Cont. Current	100 Amps
Max. Inrush Current	400Amps
Standby Current	quantity Add to cart SKU:OY0000148251 Category: Batteries & Chargers Like tweet save share linked Description Specification Reviews (0) The SBI12-LLD is a microprocessor-controlled Load Disconnect Isolator. The SBI12-LLD is designed for use in lithium battery applications (LiFePO4)as a system to protect the battery from being excessively discharged by auxiliary loads, enabling the auxiliary battery to remain above the level at which internal protection circuitry would activate. Falling below this threshold would prevent many chargers from recharging the battery. Put simply, once the auxiliary battery has been overly discharged, the Load Disconnect Isolator will turn off any connected loads. Similarly, if the battery climbs back above a suitable level, the Load Disconnect Isolator will restore power to the connected loads. Spike protection The SBI12-LLD Smart Start battery isolator incorporates a number of spike protection components specifically designed to reduce the risk of damaging the unit. It is also designed to prevent any spikes generated by the solenoid coil from affecting vehicle equipment. Features Overmould design Compact in size and easy to install Silver contacts for longer life and suitable for marine applications Power saving technology Fault indication Fully surge protected System Voltage 12V Nominal Turn ON Voltage 11.0V Turn OFF Voltage 10.5V Turn ON Delay 10 sec Turn OFF Delay 2 sec Max. Cont. Current 100 Amps Max. Inrush Current 400Amps Standby Current 0 reviews for Redarc Battery Isolator to suit LiFePO4 Battery There are no reviews yet. Be the first to review this product! Add a review Your email address will not be published. Required fields are marked * Related Products