- Email: [email protected]
This R36S replacement LCD screen is a drop-in 3.5-inch 640480 IPS panel (HL-PGDM035HD-C-V2) for the R36S, R36H and R35S. If your screen is cracked, scratched or dead but the console still powers on, this brings it back to life for a fraction of the cost of a new device and keeps a perfectly good board out of landfill.
Screens are the part these consoles most often lose first: a drop onto a corner, a heavy object in the same bag, a scratch deep enough to catch light. Meanwhile the board underneath usually survives everything. Fitting an R36S replacement LCD screen restores full brightness, colour and sharpness at genuine factory specification this is the same 640480 IPS panel type the console shipped with, not a lower-grade substitute.
This is the bare LCD panel and does not include the front cover glass. The LCD and its cover cannot be separated once bonded if your front cover glass is also broken, you need a panel-with-cover part instead. Not sure which model or hardware revision you have? Check our hardware identification checklist or the community-maintained R36S wiki before ordering.
Fitting requires opening the console and reseating one ribbon cable a calm 20-minute job with a small Phillips screwdriver. Work on a clean surface, keep screws grouped, and disconnect the battery before touching the ribbon. If you've never opened a handheld before, watch a teardown video first and take your time; nothing inside is fragile if you're patient. While the shell is open it's also the perfect moment to fit a fresh tempered glass protector so the new panel starts life defended and an R36S silicone case makes the next drop a non-event.
Tools and cover glass are not included.
Free worldwide shipping 30-day money-back guarantee
The R36S family has s
This R36S replacement LCD screen is a drop-in 3.5-inch 640480 IPS panel (HL-PGDM035HD-C-V2) for the R36S, R36H and R35S. If your screen is cracked, scratched or dead but the console still powers on, this brings it back to life for a fraction of the cost of a new device and keeps a perfectly good board out of landfill.
Screens are the part these consoles most often lose first: a drop onto a corner, a heavy object in the same bag, a scratch deep enough to catch light. Meanwhile the board underneath usually survives everything. Fitting an R36S replacement LCD screen restores full brightness, colour and sharpness at genuine factory specification this is the same 640480 IPS panel type the console shipped with, not a lower-grade substitute.
This is the bare LCD panel and does not include the front cover glass. The LCD and its cover cannot be separated once bonded if your front cover glass is also broken, you need a panel-with-cover part instead. Not sure which model or hardware revision you have? Check our hardware identification checklist or the community-maintained R36S wiki before ordering.
Fitting requires opening the console and reseating one ribbon cable a calm 20-minute job with a small Phillips screwdriver. Work on a clean surface, keep screws grouped, and disconnect the battery before touching the ribbon. If you’ve never opened a handheld before, watch a teardown video first and take your time; nothing inside is fragile if you’re patient. While the shell is open it’s also the perfect moment to fit a fresh tempered glass protector so the new panel starts life defended and an R36S silicone case makes the next drop a non-event.
Tools and cover glass are not included.
Free worldwide shipping 30-day money-back guarantee
The R36S family has s
There are no reviews yet. Be the first to review this product!
Add a review
Your email address will not be published. Required fields are marked *