Secretlab Premium Extra Small Casters (set of 5)
$69.00$34.50
- Email: [email protected]
$4.39
$3.51
The Light Sense Kit by MitchElectronics is an electronic kit that lets you build a light detector module with a selectable sensitivity. This kit is excellent for makers needing to add a light-sensing module to their design and ideal for beginners looking to get some soldering practice.
The Light Sense is a self-build DIY electronics kit that includes everything needed to detect ambient light. Powered from voltages between 3V and 12V, the Light Sense has two outputs; one digital and one analogue.
The digital output is connected to the output of the onboard comparator that produces either a logical 1 or 0 depending on the presence of light, andthe Light Sense potentiometer is used to determine the sensitivity of the sensor. The analogue output is a voltage that is proportional to the amountof light falling onto the sensor, and this can be useful for measuring ambient light levels.
While the board comes with components suitable for most applications, it is perfectly possible to change the components to adjust its operation.For example, changing the size of the sensor series resistor can increase the sensitivity of the sensor.
Product specifics
- Component Count: 9
- Operating Voltage: 3V to 12V
- Output Voltage (Digital): VCC 1.7V
- Operating Frequency: N/A
- Dimensions (PCB): 40mm x 20mm
- Mounting Holes: Yes
- Prebuilt: No Kit form
- Batteries Not Included
Included in this kit
- 1 x LM358
- 1 x 8 DIP Socket
- 1 x Light Sensor
- 1 x 1K Resistor
- 2 x 10K Resistor
- 1 x 100nF Capacitor
- 1 x 10K Potentiometer
- 1 x 4-Way Socket
The Light Sense Kit by MitchElectronics is an electronic kit that lets you build a light detector module with a selectable sensitivity. This kit is excellent for makers needing to add a light-sensing module to their design and ideal for beginners looking to get some soldering practice.
The Light Sense is a self-build DIY electronics kit that includes everything needed to detect ambient light. Powered from voltages between 3V and 12V, the Light Sense has two outputs; one digital and one analogue.
The digital output is connected to the output of the onboard comparator that produces either a logical 1 or 0 depending on the presence of light, andthe Light Sense potentiometer is used to determine the sensitivity of the sensor. The analogue output is a voltage that is proportional to the amountof light falling onto the sensor, and this can be useful for measuring ambient light levels.
While the board comes with components suitable for most applications, it is perfectly possible to change the components to adjust its operation.For example, changing the size of the sensor series resistor can increase the sensitivity of the sensor.
Product specifics
- Component Count: 9
- Operating Voltage: 3V to 12V
- Output Voltage (Digital): VCC 1.7V
- Operating Frequency: N/A
- Dimensions (PCB): 40mm x 20mm
- Mounting Holes: Yes
- Prebuilt: No Kit form
- Batteries Not Included
Included in this kit
- 1 x LM358
- 1 x 8 DIP Socket
- 1 x Light Sensor
- 1 x 1K Resistor
- 2 x 10K Resistor
- 1 x 100nF Capacitor
- 1 x 10K Potentiometer
- 1 x 4-Way Socket
0 reviews for MitchElectronics Light Sensor DIY Electronics Solder Kit, Light Sense
There are no reviews yet. Be the first to review this product!
Add a review
Your email address will not be published. Required fields are marked *