$124.50 $62.25

ES10 Door Strike, 1300kg, ANSI Footprint, Non monitored

The patented ES10, ANSI footprint, electric strikes are site interchangeable for Power To Lock (PTL) or Power To Release (PTR) through reversing the position of the "barbell" inside the strikes housing; simply unscrew the spring screw cap, remove the "barbell", reverse it and re-fix the spring screw cap. It is suitable for all types of wooden, steel, PVC, aluminium or stainless door frames. The ES10 is pre-drilled for extension lips, and comes with a 5 year warranty.

Features:
  • Stainless steel faceplate and keeper
  • Low power consumption
  • Compatible with latch depth of up to 15mm
  • IP56 Rated
  • 125 x 42 x 35mm
  • 12V DC 200mA, 24V DC 100mA
  • Compatible Power Supply
  • Over 1300Kg holding force

Downloads

    Choosing an electronic door locks

    The electronic door strike is installed within the door and activated by an intercom or access control system.

    All strikes work on the principle of electronically controlling the temporary free movement of the jaw (striker) allowing for door opening without manual retraction of the latchbolt.

    Ideally, the latch should have a dead-locking facility whereby the latch bolt cannot be forced back into its case because of the action of the snib resting against the electric strike forend. This facility offers extra protection when a strike is fitted to an outward opening door.

    WHICH DOOR STRIKE SHOULD BE USED?

    This depends on a number of factors. What level of security is needed? What type of door material is the strike to be fitted to? Single or double door? Is monitoring of the strike required? What power supply unit is to be used in the system? Is the system AC or DC? What else is running off the PSU?

    LEVEL OF SECURITY

    There are three basic categories.

    1. Light: normally with no quoted holding force or life. Usually AC and used for low cost door entry systems.
    2. Medium: Holding force of at least 1,000lb with guarantees of two or three years.
    3. High: Holding force of at least 3,000lb with guarantees of up to five years. Some are available with UL approval.

    TYPE OF DOOR

    Door material - internal or external, single or double doors.

    <

    SKU:OY0000147226 Category:

    ES10 Door Strike, 1300kg, ANSI Footprint, Non monitored

    The patented ES10, ANSI footprint, electric strikes are site interchangeable for Power To Lock (PTL) or Power To Release (PTR) through reversing the position of the “barbell” inside the strikes housing; simply unscrew the spring screw cap, remove the “barbell”, reverse it and re-fix the spring screw cap. It is suitable for all types of wooden, steel, PVC, aluminium or stainless door frames. The ES10 is pre-drilled for extension lips, and comes with a 5 year warranty.

    Features:
    • Stainless steel faceplate and keeper
    • Low power consumption
    • Compatible with latch depth of up to 15mm
    • IP56 Rated
    • 125 x 42 x 35mm
    • 12V DC 200mA, 24V DC 100mA
    • Compatible Power Supply
    • Over 1300Kg holding force

    Downloads

      Choosing an electronic door locks

      The electronic door strike is installed within the door and activated by an intercom or access control system.

      All strikes work on the principle of electronically controlling the temporary free movement of the jaw (striker) allowing for door opening without manual retraction of the latchbolt.

      Ideally, the latch should have a dead-locking facility whereby the latch bolt cannot be forced back into its case because of the action of the snib resting against the electric strike forend. This facility offers extra protection when a strike is fitted to an outward opening door.

      WHICH DOOR STRIKE SHOULD BE USED?

      This depends on a number of factors. What level of security is needed? What type of door material is the strike to be fitted to? Single or double door? Is monitoring of the strike required? What power supply unit is to be used in the system? Is the system AC or DC? What else is running off the PSU?

      LEVEL OF SECURITY

      There are three basic categories.

      1. Light: normally with no quoted holding force or life. Usually AC and used for low cost door entry systems.
      2. Medium: Holding force of at least 1,000lb with guarantees of two or three years.
      3. High: Holding force of at least 3,000lb with guarantees of up to five years. Some are available with UL approval.

      TYPE OF DOOR

      Door material – internal or external, single or double doors.

      <

      0 reviews for FSH FES10 Electric Door Strike Non Monitored, FSHFES10

      There are no reviews yet. Be the first to review this product!

      Add a review

      Your email address will not be published. Required fields are marked *