Light Orange 17ml
$5.09$4.07
- Email: [email protected]
$39.99
$31.99
The curved base fits snugly against the helmet and adheres firmly to stay in place. Paired with a high-strength carbon fiber straight rod, it enables a distinctive third-person tracking perspective.
Tips
1. When attaching the base, press firmly for more than 30 seconds, and let it sit for 30 minutes to ensure adhesion.
2. This product is intended for one-time use on clean, curved surfaces only. If the surface is not sufficiently smooth, apply the included adhesive pad first, then attach the base.
3. The ideal application temperature is between -10C and 40C (14 F to 104 F).
4. After wearing, be sure to tighten the locking nut to prevent shaking or displacement due to significant bumps during movement.
5. While capturing 360 shots, The bottom of the camera facing the helmet may be closer than the minimum required stitching distance. Adjust the angle and composition to avoid close-range stitching flaws at the bottom.
In the Box:
- Osmo Curved Adhesive Base Max 1
- 28 cm Carbon Fiber Straight Rod 1
- 1/4"" Thread to Dual Prong Adapter 1
- Osmo Action Quick-Release Adapter Mount 1
- Osmo Locking Screw 1
- Screw Locking Wrench 1
- Hex Key 1
Specifications:
- Osmo Curved Adhesive Base Max
- Dimensions: Approx. 50 55 24 mm (L W H)
- Weight: Approx. 17 g
- Hex Key
- Dimensions: Approx. 53 97 16 mm (L W H)
- Weight: Approx. 8 g
- 28cm Carbon Fiber Straight Rod
- Dimensions: Approx. 291 17 23 mm (L W H)
- Weight: Approx. 45 g
- Osmo Locking Screw\
- Dimensions: Approx. 13.3 23 55.6 mm (L W H)
- Weight: Approx. 12 g
- 1/4'' Thread to Two-Prong Adapter
- Dimensions: Approx. 321818 mm (LWH)
- Weight: Approx. 9 g
- Osmo Action Quick-Release Adapter Mount
- Dimensions: Approx. 412134 mm (LWH)
- Weight: 16 g
Compatibility:
- Osmo 360
- Osmo 360 II
The curved base fits snugly against the helmet and adheres firmly to stay in place. Paired with a high-strength carbon fiber straight rod, it enables a distinctive third-person tracking perspective.
Tips
1. When attaching the base, press firmly for more than 30 seconds, and let it sit for 30 minutes to ensure adhesion.
2. This product is intended for one-time use on clean, curved surfaces only. If the surface is not sufficiently smooth, apply the included adhesive pad first, then attach the base.
3. The ideal application temperature is between -10C and 40C (14 F to 104 F).
4. After wearing, be sure to tighten the locking nut to prevent shaking or displacement due to significant bumps during movement.
5. While capturing 360 shots, The bottom of the camera facing the helmet may be closer than the minimum required stitching distance. Adjust the angle and composition to avoid close-range stitching flaws at the bottom.
In the Box:
- Osmo Curved Adhesive Base Max 1
- 28 cm Carbon Fiber Straight Rod 1
- 1/4″” Thread to Dual Prong Adapter 1
- Osmo Action Quick-Release Adapter Mount 1
- Osmo Locking Screw 1
- Screw Locking Wrench 1
- Hex Key 1
Specifications:
- Osmo Curved Adhesive Base Max
- Dimensions: Approx. 50 55 24 mm (L W H)
- Weight: Approx. 17 g
- Hex Key
- Dimensions: Approx. 53 97 16 mm (L W H)
- Weight: Approx. 8 g
- 28cm Carbon Fiber Straight Rod
- Dimensions: Approx. 291 17 23 mm (L W H)
- Weight: Approx. 45 g
- Osmo Locking Screw\
- Dimensions: Approx. 13.3 23 55.6 mm (L W H)
- Weight: Approx. 12 g
- 1/4” Thread to Two-Prong Adapter
- Dimensions: Approx. 321818 mm (LWH)
- Weight: Approx. 9 g
- Osmo Action Quick-Release Adapter Mount
- Dimensions: Approx. 412134 mm (LWH)
- Weight: 16 g
Compatibility:
- Osmo 360
- Osmo 360 II
0 reviews for DJI Osmo Third-Person Helmet Mount Kit
There are no reviews yet. Be the first to review this product!
Related Products
Light Green 4mm Small
$10.80$8.64
Light Green 6mm Small
$10.80$8.64
Saeryn, Omen of Everblight
$12.98$10.38
Add a review
Your email address will not be published. Required fields are marked *